Lumatek 1000 watt Air Cooled Ballast and Bulb Combo

Not just your standard eballast the new Dial-A-Watt Lumateks have advanced dimming capabilities and are able to power different wattage lamps on the same ballast making them the most versatile ballasts available. The 5th generation Lumatek ballasts produce the highest operating frequency of any eBallast on the market today and offer unmatched performance. Now you can dim your lamps which can be a great way to deal with heat issues in your garden and to help control your electricity bill. You can also use different wattage lamps by setting the dial on the ballast to the desired output power and putting in the proper wattage lamp. Note that both the input and output power of the ballast is changed when you select different settings.

For example when you set the dial to 600W on a 1000W Dial-A-Watt Lumatek the ballast performs exactly the same as a regular 600W Lumatek ballast.
This a great feature for gardeners that want to use a 600W MH lamp for the vegetative phase of growth and then switch over to a 1000W HPS lamp when it’s time to bloom.

Lumatek makes the only dual-voltage eBallast available that produces the same lamp power when used on 120V or 240V.
This is a major advantage considering that a typical dual-voltage eBallast losses as much as 15% of its output when used on 120V.
All Lumatek models are generator ready and are capable of being used on 208V three-phase power.

Lumatek has been a long standing pioneer in creating innovative lighting technologies for the indoor gardening industry.
Lumatek offers the most complete line of dimmable multi-wattage ballasts on the market.
Sold in more than 40 countries Lumatek is the world’s number one selling ballast.

Lumatek 240V 1000 Watt Electronic Ballasts burned the 2 test bulbs we tried visibly brighter to the eye than a regular coil/core ballast!

Why choose a Lumatek Electronic ballast over a core-and-coil (magnetic) ballast?
- Comp- Fast start-up ...It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes
- Produce less heat
- Cut-off circuitry ...Automatic cut off when a short is detected. For ultimate safety.
- Longer bulb life...Lumen output loss over time is dramatically less than with magnetic ballasts
- Fully interchangeable ...Lumatek ballasts can light both HPS and MH bulbs

More lumen output...20%-30% more lumens output...More light equals more yield

- Every Lumatek ballast is burned for 12 hours at the factory
- Excellent three year, full exchange warranty
- Lumatek ballasts are 8% brighter than ROM and future ballasts

Ballast comes with 15' Lampcord !
Most companies add $35 for this cordset

This ballast will run a HPS or MH 1000 watt Bulb
When Selector switch is set to 600 it will run a 600 watt MH or HPS bulb

The Dual Voltage Ballast comes with a 120 volt power cord ( regular 3 prong)

If your power source is 240 and requires the cord shown below
You must order it from the dropdown selection box at bottom of page

NEW Air Cooled Lumatek Digital Ballast
Runs on 120 or 240 volts
Will Run 1000 watt bulbs, 600 watt bulbs & 400 watt bulbs

THIS PACKAGE INCLUDES
1 x 1000 WATT Lumatek Air Cooled Ballast
1 x 1000 WATT Lumatek HPS Bulb

Reflector not included